- Visión General
- Product Description
- Details
- Applications
- Crushing Effect
- Technical Data Sheet
- Successful Cases
- About Us
Información Básica.
Descripción de Producto
Single Shaft Shredder (MSA-F Series)
MSA-F Series Single Shaft Shredders are widely used in the volumetric reduction of various waste products, including but not restricted to the following. Plastc Bottles, Plastic Pipes, Woven Bags, Electrical Cable, Wood, Paper, Domestic Rubbish & Electronic Waste. A suitable screen can be chosen depending upon the materials being processed and the next processing requirement. The Output material discharged by the shredder could be an end product or the primary feed for the next process. The MSA-F Series Shredder can be equipped with many different rotor configurations. In addition, a cooling system, bead welds & an additional wear layer can be added.
Enerpat MSA-F Series Industrial Single Shaft Shredder for Plastic
Bearing / Bearing Holder High strength bearing,long service life | Electric System Intelligent control system with overload protection | Hydraulic System Two-speed hydraulic system,guarantee the capacity | Hydraulic Material Pusher Automatic working which can accept continuously feeding |
-
V type rotor knives layout design,special heat treatment knife material DC 53,4 sides can be used
-
The gaps between the rotor knives and counter knives can be adjusted.
-
The cutter shaft with surfacing treatment can be used for shredding hard materials like light scrap metals
-
The screen can be changed conveniently,the end products size depends on the screen mesh size
-
Machine has screen supports,which been controlled by the hydraulic cylinder,with safety switch
-
Customized screen mesh design depends on different materials
-
The chamber adopting advanced seal design,with adjustable copper guide blocks and integrated front guide plate
-
Dust leakage groove -- The dust will be removed from this groove,good protection for the hydraulic system
-
High efficiency electric motor with star delta start,F1200 and F1500 with Hydraulic Coupler
-
Heavy Duty Gearbox - Adopting high safety factor models,connect with the cutter shaft directly
-
Gearbox damping device - prevent damage for the power drive system
Model | MSA-F600 | MSA-F800 | MSA-F1000 | MSA-F1200 |
Feeding Hopper(mm) | 800×600 | 1300×800 | 1300×1000 | 1300×1200 |
Cutter Shaft Length(mm) | 600 | 800 | 1000 | 1200 |
Discharge Height(mm) | 490 | 565 | 565 | 565 |
Pusher Stroke(mm) | 500 | 815 | 815 | 815 |
Rotor Knives Quantity(pcs) | 23 | 35 | 45 | 55 |
Counter Knives Quantity(pcs) | 4 | 4 | 4 | 6 |
Motor Power (kw) | 18.5 | 37 | 45 | 55 |
Hopper Volume(L) | 760 | 1500 | 1760 | 2030 |
Machine Size (mm) | 1290×1820×1730 | 2800×1765×2080 | 2800×1980×2090 | 2800×2490×2135 |
Machine Weight(kgs) | 1650 | 4000 | 4300 | 5300 |
Model | MSA-F1500 | MSA-F2000 | MSA-F2800 |
Feeding Hopper(mm) | 1300×1500 | 1675×2000 | 1900×2000 |
Cutter Shaft Length(mm) | 1500 | 2000 | 2800 |
Discharge Height(mm) | 565 | 720 | 720 |
Pusher Stroke(mm) | 815 | 1100 | 1100 |
Rotor Knives Quantity(pcs) | 70 | 95 | 216 |
Counter Knives Quantity(pcs) | 6 | 8 | 5+5 |
Motor Power (kw) | 75 | 150 | 220 |
Hopper Volume(L) | 2430 | 5500 | 6500 |
Machine Size (mm) | 2800×2735×2135 | 3670×4374×2530 | 3705×5332×3146 |
Machine Weight(kgs) | 5900 | 14500 | 21000 |